Page 66 of 224
Upgrade a two-cabinet system with metal cable to Option 11C
Figure 23
Glass fiber-optic cable connection
553-3021-250
Standard 7.00
Insert plug and twist one-half
turn clockwise to lock.
35
Install the receiver card in the slot labeled "Fbr Rcvr."
Wind the slack fiber-optic cable around the fiber routing guide one
time.
36
Remove the NTAK04, NTDK78, NTAK05, or NTDK72 power supply
from the old cabinet and install it in the new expansion cabinet.
Connect the power cord to the bottom of the power supply unit.
37
Remove any circuit cards that you want to save from the old
expansion cabinet. Install these circuit cards in the matching
slots in the new cabinet.
April 2000