Nortel Meridian 1 Option 11C Upgrade Manual page 134

Page 134 of 224
553-3021-250 Standard 7.00
Assign TDS/DTR, XTD, and SDI functions
7 Remove the TDS function using LD 17.
To remove the TDS function, follow the instructions in Table 8.
Note: If you do not first disable the TDS in LD 34 (see Step 2 on page
132), this step will fail. This step will also fail if you do not first remove
the DTRs from the TDS/DTR slot.
Table 8
LD 17 - Remove TDS.
Prompt Response
REQ CHG
TYPE CFN
CEQU YES
TDS Xn
8 Remove the SDI ports using LD 17 (shown in Table 9).
To remove TTY ports 1 and 2, do the following for each port:
Table 9
LD 17 - Remove SDI ports 1 and 2.
Prompt Response
REQ CHG
TYPE ADAN
ADAN OUT TTY X
9 Remove the NTAK03 TDS/DTR card from the cabinet.
April 2000
Comments
Change.
Configuration data block.
For changes to common
equipment
n = 1 to 9 (TDS card slot
location). Put an X before to
remove.
Comments
Change.
Change I/O device
X = 1
X = 2