Nortel Meridian 1 Option 11C Upgrade Manual page 59

Upgrade a two-cabinet system with metal cable to Option 11C
The following is a summary of the steps described in the Option 11C
Planning and Installation Guide (553-3021-210) :
a If the system prompts you, enter the system time and date. Skip
this step if the Software Installation Main Menu appears instead.
Note: The system time and date prompt appears when the Software
Installation Program detects a system year date not in the range of
1995 to 2095.
b Do one of the following to select the type of upgrade:
• If using the Software Delivery (PCMCIA) card:
i
ii
• If you are upgrading using the software daughterboard, select
New System Installation or Option 11/11E Upgrade - From
Software Daughterboard.
c Select the feature set to be enabled from the "Select Feature Set
You Wish to Enable" menu.
Note: The items you select in steps c, d, f, g and h must match the one
provided with keycode data sheet.
d Select feature package numbers to add, if any.
Enter package numbers. Press <CR> twice to end package
selection.
e Select the database source.
Select one of the following from the "Select Option 11/11E
Database Source" list:
• Select CCBR Restore file if you extracted the customer
database using the CCBR feature. When you select this
option, you access the Data Transfer mode. You begin the
data restoration and upgrading process by pressing <CR>
when prompted to do so.
• Select Option 11/11E Software Cartridge if you are using the
Database Upgrade Tool to extract the customer database from
the existing software cartridge.
Select System Upgrade from the Software Installation
Main Menu.
Then select Option 11/11E to Option 11C
from the "Select type of upgrade to be performed" menu.
Option 11C and 11C Mini
Page 59 of 224
Upgrade Procedures Guide