Nortel Meridian 1 Option 11C Upgrade Manual page 100

Page 100 of 224
553-3021-250 Standard 7.00
Upgrade an Option 11E with fiber-optic cable to Option 11C
19 Do one of the following to extract the customer database from the
existing system:
— If you are not using the Database Upgrade Tool, skip this step and
go to Step 20 on page 100.
— If you are using the Database Upgrade Tool, install the software
cartridge from the existing system to the Database Upgrade Tool.
a Remove the software cartridge from the existing NTBK45
System Core card.
b Connect the Option 11E software cartridge to the connector on
the Database Upgrade Tool.
c Position the software cartridge on the Database Upgrade Tool
towards the left. Insert the Database Upgrade Tool in slot B of
the PCMCIA socket located in the faceplate of the NTDK20
SSC card.
20 Connect the power to the main cabinet.
Set the circuit breaker switch on the front of the power supply unit in
the cabinet to ON.
If equipped with reserve battery power, set the circuit breaker switch
on the reserve battery power unit to ON.
21 Observe the terminal screen.
When you power up, the Software Installation Program automatically
starts.
Note: This program is menu-driven allowing the easy installation of
software and customer databases in the Option 11C. It is clear and
direct and includes a Help facility to help you make correct selections.
However, if you need more detailed information, refer to "Upgrade the
software" on page 146.
The following is a summary of the steps described in "Upgrade the
software" on page 146:
a If the system prompts you, enter the system time and date. Skip
this step if the Software Installation Main Menu appears instead.
Note: The system time and date prompt appears when the Software
Installation Program detects a system year date that is not in the range
of 1995 to 2095.
b Do one of the following to select the type of upgrade:
• If using the Software Delivery (PCMCIA) card:
April 2000