Page 218 of 224
553-3021-250
Standard 7.00
Use the flash boot ROM utility
Procedure 29
Update the boot code
Note: You will not interrupt service on the system while performing
this procedure.
1
Insert the Software Delivery card in slot A of the PCMCIA socket
located in the faceplate of the Option 11C NTDK20 SSC card or
the Option 11C Mini MSC card.
Carefully press on the PCMCIA card until it seats tightly.
2
Log in and load overlay program 143 (LD 143).
a
Enter LOGI.
The screen displays the PASS? prompt.
b
Respond to the PASS? prompt.
Note: The response to
response shown below is an example only.
LOGI
PASS?
0000 <CR>
LD 143 <CR>
UPGRADE <CR>
c
Look for the following message:
62)7:$5( ,167$//$7,21 352*5$0
• If the screen displays the message, continue to Step 3.
• If the screen does not display the message, repeat Step 2 (this
step) and make sure you enter the correct information.
3
Select Utilities (item 3) from the Main Menu.
4
Select Flash Boot ROM Utilities (item 7) from the Utilities menu.
April 2000
3$66"
is different for each system. The