Nortel Meridian 1 Option 11C Upgrade Manual page 119

18 Connect the power supply cords (Figure 48 on page 116).
19 Connect the power to the cabinet.
Set the circuit breaker switch on the front of the power supply unit in
the cabinet to ON.
If equipped with reserve battery power, set the circuit breaker switch
on the reserve battery power unit to ON.
The system will SYSLOAD and return to normal.
20 Install the new door on the cabinet.
—————————— End of Procedure ——————————
Upgrade cabinet hardware
Option 11C and 11C Mini
Page 119 of 224
Upgrade Procedures Guide