Table of Contents
Advertisement
Loading an Approach into the Active Flight Plan
Loading an approach into the active flight plan using the PROC
Key:
1) Press the PROC Key. The 'Procedures' Window is displayed.
2) Highlight 'Select Approach', and press the ENT Key. The 'PROC - Approach
Loading' Page is displayed.
3) Select the airport and approach:
a) Use the FMS Knob to select an airport and press the ENT Key.
b) Select an approach from the list and press the ENT Key.
Or:
a) If necessary, push the FMS Knob to exit the approach list, and use the
large FMS Knob to move the cursor to the Approach 'Channel' Field.
b) Use the FMS Knob to enter the approach channel number, and press
the ENT Key to accept the approach channel number. The airport and
approach are selected.
4) Select a transition (if required) and press the ENT Key.
5) Minimums
a) To set 'Minimums', turn the small FMS Knob to select 'BARO', 'TEMP
COMP' or 'RAD ALT', and press the ENT Key. Turn the small FMS Knob
to select the altitude, and press the ENT Key.
b) If 'TEMP COMP' was selected, the cursor moves to the temperature
field. Turn the small FMS Knob to select the temperature, and press the
ENT Key.
Or:
To skip setting minimums, press the ENT Key.
6) Press the ENT Key with 'Load?' highlighted to load the approach
procedure; or turn the large FMS Knob to highlight 'Activate' and press the
ENT Key to load and activate the approach procedure.
When GPS is not approved for the selected final approach course, the
message '- NOT APPROVED FOR GPS - GPS guidance is for monitoring only.
Load approach?' is displayed. With 'Yes' highlighted, press the ENT Key.
When a visual approach is selected, the message 'Obstacle clearance is not
provided for visual approaches' is displayed. With 'OK' highlighted, press
the ENT Key.
190-02040-01 Rev. B
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Flight Management
75
Advertisement
Table of Contents
