Garmin Beechcraft 200 Series Cockpit Reference Manual page 158

Hazard Avoidance
Changing the traffic altitude display range on the PFD:
1) Press the XPDR/TFC Softkey.
2) Press the TCAS Softkey.
3) Press the ALT RNG Softkey.
4) Press one of the following altitude range softkeys:
• Above: Displays Other Non-Threat and Proximity Advisory traffic from
9900 feet above the aircraft to 2700 feet below the aircraft. Typically
used during climb phase of flight.
• Normal: Displays Other Non-Threat and Proximity Advisory traffic from
2700 feet above the aircraft to 2700 feet below the aircraft. Typically
used during enroute phase of flight.
• Below: Displays Other Non-Threat and Proximity Advisory traffic from
2700 feet above the aircraft to 9900 feet below the aircraft. Typically
used during descent phase of flight.
• UNREST (unrestricted): All detected traffic in the air is displayed
5) Press the Back Softkey.
Changing the traffic altitude display range on the MFD:
1) On the Traffic Map Page, press the ALT RNG Softkey.
2) Press one of the following Softkeys (see softkey description in step 4
above):
• Below
• Normal
• Above
• UNREST
3) To return to the Traffic Page, press the Back Softkey.
Changing the display range on the Traffic Map Page:
1) Turn the Joystick.
2) The following range options are available:
• 750 ft
• 750 ft and 1500 ft
• 1500 ft and 0.5 nm
• 0.5 nm and 1 nm
134 Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-02040-01 Rev. B