Table of Contents
Advertisement
2) Use the FMS Knob to select the desired airport (the nearest one is already
selected).
3) Press the Direct-to Key.
4) Press the ENT Key. The cursor is now displayed on 'Activate?'.
5) Press the ENT Key again to activate the direct-to.
Selecting a manual direct-to course:
1) Press the ¯ Key. The 'Direct To' Window is displayed (with the active
flight plan waypoint as the default selection or a blank waypoint field if no
flight plan is active).
2) Turn the large FMS Knob to highlight the 'CRS' or 'Course' Field.
3) Highlight the 'CRS' or 'Course' Field.
4) Enter the desired course.
5) Press the ENT Key. The cursor is now displayed on 'Activate?'.
6) Press the ENT Key again to activate the direct-to.
Reselecting the direct course from the current position:
1) Press the Direct-to Key. The 'Direct To' Window is displayed with the
cursor flashing in the 'Ident, Facility, City' Box.
2) Press the ENT Key. The cursor is now displayed on 'Activate?'.
3) Press the ENT Key again to activate the direct-to.
Selecting a waypoint as a direct-to destination using the pointer:
1) From a 'Map - Navigation Map' Page, press the Joystick to display the
pointer.
2) Move the Joystick to place the pointer at the desired destination location.
3) If the pointer is placed on an existing airport, NAVAID, or user waypoint, the
waypoint name is highlighted.
4) Press the Direct-to Key to display the 'Direct To' Window with the selected
point entered as the direct-to destination.
5) Press the ENT Key. The cursor is now displayed on 'Activate?'.
6) Press the ENT Key again to activate the direct-to.
Cancelling a Direct-to:
1) Press the Direct-to Key to display the 'Direct-To' Window.
2) Press the MENU Key.
190-02040-01 Rev. B
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Flight Management
43
Advertisement
Table of Contents
