Table of Contents
Advertisement
Flight Instruments
Setting the Selected Altitude:
Turn the ALT SEL Knob to set the Selected Altitude in 100-ft increments.
If set, the Minimum Descent Altitude/Decision Height (MDA/DH) value is also
available for the Selected Altitude.
When the altimeter is configured for metric units, the selected altitude is
adjusted in 50 meter increments.
Selecting the altitude display units:
1) Turn the FMS Knobs to select the 'Aux - System Setup 1' Page on the MFD.
2) If necessary, press the Setup 1 Softkey to display the System Setup 1 Page.
3) Press the FMS Knob to activate the cursor.
4) Turn the large FMS Knob to highlight the 'ALT, VS' datafield in the 'Display
Units' Window.
5) Turn the small FMS Knob to highlight either 'Feet(FT,FPM)' or
'Meters(MT,MPS)' and press the ENT Key. This setting affects altitude
displays system-wide, in addition to those shown on the PFD.
Displaying altitude in meters:
1) Press the PFD Opt Softkey to display the second-level softkeys.
2) Press the ALT Units Softkey.
3) Press the Meters Softkey to turn on metric altitude readouts.
4) Press the Back Softkey twice to return to the top-level softkeys.
Selecting the altimeter barometric pressure setting:
Turn the BARO Knob to select the desired setting.
Selecting standard barometric pressure:
Press the BARO Knob to select standard pressure; STD BARO is displayed
in barometric setting box.
Or:
1) Press the PFD Opt Softkey to display the second-level softkeys.
2) Press the STD Baro Softkey; STD BARO is displayed in barometric setting
box.
2
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-02040-01 Rev. B
Advertisement
Table of Contents
