Garmin Beechcraft 200 Series Cockpit Reference Manual page 61

3) Enter a user waypoint name (up to six characters).
4) Press the ENT Key to accept the selected name.
5) If desired, define the type and location of the waypoint in one of the
following ways:
Select "RAD/RAD" using the small FMS Knob, press the ENT Key,
and enter the two reference waypoint identifiers and radials into the
'Reference Waypoints' Window using the FMS Knobs.
Or:
Select "RAD/DIS" using the small FMS Knob, press the ENT Key, and
enter the reference waypoint identifier, the radial, and the distance into
the 'Reference Waypoints' Window using the FMS Knobs.
Or:
Select "LAT/LON" using the small FMS Knob, press the ENT Key, and
enter the latitude and longitude into the 'Information' Window using
the FMS Knobs.
6) Press the ENT Key to accept the new waypoint.
7) If desired, change the storage method of the waypoint to temporary or
normal by moving the cursor to "Temporary" and pressing the ENT Key to
check or uncheck the box.
8) Press the FMS Knob to remove the flashing cursor.
9) Press the Go Back Softkey to return to the map page.
Editing User Waypoints
Editing a user waypoint comment or location:
1) With the 'WPT - User WPT Information' Page displayed, press the FMS
Knob to activate the cursor. The cursor is placed in the 'User Waypoint' Box.
2) Use the FMS Knobs to enter the name of the User Waypoint; or turn the
large FMS Knob and scroll to the desired waypoint in the 'User Waypoint
List' Box.
3) Turn the large FMS Knob to move the cursor to the desired field.
4) Use the FMS Knobs to make any changes.
5) Press the ENT Key to accept the changes.
6) Press the FMS Knob to remove the flashing cursor.
190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Flight Management
37