Table of Contents
Advertisement
Flight Management
Changing the altitude buffer distance setting:
1) Use the FMS Knob to select the 'Aux - System Setup 1' Page (Setup 1
Softkey).
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the 'Altitude Buffer' Field in the
'Airspace Alerts' Box.
4) Use the FMS Knob to enter an altitude buffer value and press the ENT Key.
5) Press the FMS Knob to remove the flashing cursor.
Enabling/disabling the Arrival Alert:
1) Use the FMS Knob to select the 'Aux - System Setup 1' Page (Setup 1
Softkey).
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to select the 'On/Off' Field in the 'Arrival Alert'
Box.
4) Turn the small FMS Knob clockwise to turn the airspace alert On or
counterclockwise to turn the alert Off.
Changing the arrival alert trigger distance:
1) Use the FMS Knob to select the 'Aux - System Setup 1' Page (Setup 1
Softkey).
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the 'Distance' Field in the 'Arrival
Alert' Box.
4) Use the FMS Knob to enter a trigger distance and press the ENT Key.
Selecting and viewing an airspace alert with its associated infor-
mation:
1) Use the FMS Knob to select the 'NRST - Nearest Airspaces' Page.
2) Press the FMS Knob; or press the MENU Key, highlight 'Select Alerts
Window', and press the ENT Key. The cursor is placed in the 'Airspace
Alerts' Box.
3) Select the desired airspace.
4) Press the FMS Knob to remove the flashing cursor.
40
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-02040-01 Rev. B
Advertisement
Table of Contents
