Appendix
Or:
Remove power from the system if the Restart Softkey is diminished.
12) Press the ENT Key or the right-most softkey on MFD display to
acknowledge the startup screen.
13) Turn the large FMS Knob and select Aux.
14) Turn the small FMS Knob and select the Databases.
15) Verify that the standby databases transferred and are now in the 'Active'
column.
16) To manually activate any databases that did not transfer to the 'Active'
column:
a) Press the FMS Knob. The first database title on the screen will be
selected.
b) Turn the small FMS Knob as necessary to select the database title.
c) Press the ENT Key. A cyan double-sided arrow will appear indicating
that the standby database will become active.
Or:
Press the Menu Key and select 'Swap Standby and Active' using the small
FMS Knob and press the ENT Key. Press the ENT Key or the FMS Knob
to exit.
d) Remove and reapply power to the system.
e) Press the ENT Key or the right-most softkey on MFD display to
acknowledge the startup screen.
f) Turn the large FMS Knob and select Aux.
g) Turn the small FMS Knob and select Databases.
h) Verify that the standby databases transferred and are now in the
'Active' column.
17) For additional information on each database, press and then turn the FMS
Knob to select the database, and then press the Details Softkey. Press the
ENT Key or the FMS Knob to exit.
Or:
Press the Menu Key and select 'Details' using the small FMS Knob and press
the ENT Key. Press the ENT Key or the FMS Knob to exit.
226
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-02040-01 Rev. B