Garmin Beechcraft 200 Series Cockpit Reference Manual page 90

Flight Management
3) Enter an altitude constraint value using the FMS Knobs. To enter altitudes
as a flight level, turn the small FMS Knob counter-clockwise past zero
or clockwise past 9 on the first character, and the system automatically
changes to show units of Flight Level. Turn the large FMS Knob clockwise
to highlight the first zero and enter the three digit flight level.
4) Press the ENT Key to accept the altitude constraint; if the selected waypoint
is an airport, an additional choice is displayed. Turn the small FMS Knob to
choose 'MSL' or 'AGL', and press the ENT Key to accept the altitude.
Removing/undesignating an altitude constraint:
1) Press the FPL Key on the MFD to display the 'FPL - Active Flight Plan' Page.
2) Press the FMS Knob, and turn to highlight the desired waypoint altitude
constraint.
3) Press the CLR Key. A 'Remove VNV altitude?' confirmation window is
displayed.
4) Select 'OK' and press the ENT Key.
Reverting a manually entered altitude constraint back to the
navigation database value:
1) Press the FPL Key to display the 'FPL - Active Flight Plan' Page on the MFD.
2) Press the FMS Knob, and turn to highlight the desired waypoint altitude
constraint.
3) Press the CLR Key. A 'Remove or Revert to published VNV altitude of
nnnnnFT?' confirmation window is displayed.
4) Select 'REVERT' and press the ENT Key. The altitude is changed to the
navigation database value.
5) Press the FMS Knob to remove the flashing cursor.
Entering or modifying a Baro QFE altitude constraint:
1) With Baro QFE enabled, press the FPL Key for the MFD to display the 'FPL -
Active Flight Plan' Page.
2) Press the FMS Knob, and turn the large FMS Knob to highlight the desired
waypoint altitude constraint ('ALT').
3) Turn the small FMS Knob to begin entry of the altitude constraint, and
use the FMS Knobs to enter the constraint in reference to Baro QFE. If
modifying an existing Baro QFE altitude constraint, turning the small FMS
66 Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-02040-01 Rev. B