Table of Contents
Advertisement
Changing altimeter barometric pressure setting units:
1) Press the PFD Opt Softkey to display the second-level softkeys.
2) Press the ALT Units Softkey.
3) Press the IN Softkey to display the barometric pressure setting in inches of
mercury (in Hg).
Or, press the HPA Softkey to display the barometric pressure setting in
hectopascals (hPa).
4) Press the Back Softkey twice to return to the top-level softkeys.
Synchronizing the altimeter barometric pressure settings:
1) Use the FMS Knob to select the 'Aux - System Setup 1' Page on the MFD.
2) If necessary, press the Setup 1 Softkey to display the System Setup 1 Page.
3) Press the FMS Knob to activate the cursor.
4) Turn the large FMS Knob to highlight 'BARO' in the 'Synchronization' box.
5) Turn the small FMS Knob clockwise to On or counterclockwise to Off.
6) Push the FMS Knob to deactivate the cursor.
Setting the Baro Transition Alerts:
1) Use the FMS Knob to select the 'Aux - System Setup 1' Page on the MFD.
2) Press the FMS Knob to activate the cursor.
3) To enable/disable the Baro Transition Alert based on altitude, turn the large
FMS Knob to highlight the 'On' or 'Off' field for the BARO Transition Alert
Altitude in the BARO Transition Alert Box.
4) If desired, turn the small FMS Knob to set the BARO Transition Alert
Altitude On or Off.
5) Turn the large FMS Knob to highlight the Altitude field.
6) Use the FMS Knobs to change the altitude and press the ENT Key to
accept or press the CLR Key to return to the previous altitude selection.
7) Turn the large FMS Knob to highlight the 'On' or 'Off' field for the BARO
Transition Alert Level.
8) If desired, turn the small FMS Knob to set the BARO Transition Alert Flight
Level On or Off.
190-02040-01 Rev. B
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Flight Instruments
3
Advertisement
Table of Contents
