Table of Contents
Advertisement
• 1 nm and 2 nm
• 2 and 6 nm
• 6 and 12 nm
• 12 and 24 nm
• 24 and 40 nm
Additional Traffic Displays
Displaying traffic information on MFD navigation maps:
1) Press the Map Opt Softkey.
2) Press the Traffic Softkey. Traffic is now displayed on the map.
Customizing the traffic display on the Navigation Map Page:
1) Select the Navigation Map Page.
2) Press the MENU Key.
3) With Map Settings highlighted, press the ENT Key.
4) Turn the small FMS Knob to select the Traffic Group and press the ENT Key.
5) Turn the large FMS Knob or press the ENT Key to scroll through the
selections.
• Traffic – Turns the display of traffic data on or off
• Traffic Mode – Selects the traffic mode for display; select from:
- All Traffic - Displays all traffic
- TA/RA/PA - Displays Traffic Advisories, Resolution Advisories, and
Proximity Advisories
- TA/RA Only - Displays Traffic Advisories and Resolution Advisories only
• Traffic Symbols – Selects the maximum range at which traffic
symbols are shown
• Traffic Labels – Selects the maximum range at which traffic labels
are shown with the option to turn off
6) Turn the small FMS Knob to scroll through options (On/Off, range settings,
etc.).
7) Press the ENT Key to select an option.
8) Press the FMS Knob or CLR Key to return to the Navigation Map Page.
190-02040-01 Rev. B
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Hazard Avoidance
135
Advertisement
Table of Contents
