Table of Contents
Advertisement
Annunciations & Alerts
Message
XPDR1 CONFIG – XPDR1 config
error. Config service req'd.
XPDR1 CSA FAIL – Traffic: ADS-B In
traffic alerting has failed.
XPDR1 ADS-B NO TX –
Transponder: ADS-B out has failed.
XPDR1 FAULT – Datalink: ADSB-B
in has failed.
XPDR1 FIS-B WX – Datalink: FIS-B
Weather has failed.
XPDR1 OVER TEMP – Transponder:
Transponder over temp.
XPDR1 PRES ALT –Transponder:
ADS-B no pressure altitude.
XPDR1 SRVC – XPDR1 needs
service. Return unit for repair.
XPDR1 UNDER TEMP –
Transponder: Transponder under temp.
XPDR2 CONFIG – XPDR2 config
error. Config service req'd.
XPDR2 ADS-B NO TX –
Transponder: ADS-B out has failed.
XPDR2 SRVC – XPDR2 needs
service. Return unit for repair.
XPDR2 UNDER TEMP –
Transponder: Transponder under temp.
XTALK ERROR – A flight display
crosstalk error has occurred.
214
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Comments
The transponder configuration settings do not match those of
backup configuration memory. The system should be serviced.
ADS-B Conflict Situational Awareness (CSA) is unavailable.
ADS-B is inoperative. The transponder may not be receiving
a valid GPS position. Other transponder functions may be
available. Service when possible.
The transponder is unable to receive ADS-B information.
The transponder is unable to receive FIS-B weather information.
The system has detected an over temperature condition in
XPDR1. The transmitter operates at reduced power. If the
problem persists, the system should be serviced.
Unable to provide pressure altitude information.
The #1 transponder should be serviced when possible.
The system has detected an under temperature condition in
XPDR1. The transmitter operates at reduced power. If the
problem persists, the system should be serviced.
The transponder configuration settings do not match those of
backup configuration memory. The system should be serviced.
ADS-B is inoperative. The transponder may not be receiving
a valid GPS position. Other transponder functions may be
available. Service when possible.
The #2 transponder should be serviced when possible.
The system has detected an under temperature condition in
XPDR2. The transmitter operates at reduced power. If the
problem persists, the system should be serviced.
The MFD and PFD are not communicating with each other. The
system should be serviced.
190-02040-01 Rev. B
Advertisement
Table of Contents
