Table of Contents
Advertisement
Hazard Avoidance
2) Press one of the following softkeys:
• Above: Displays Other Non-Threat and proximity traffic from 9000 feet
above the aircraft to 2700 feet below the aircraft. Typically used during
climb phase of flight.
• Normal: Displays Other Non-Threat and proximity traffic from 2700
feet above the aircraft to 2700 feet below the aircraft. Typically used
during enroute phase of flight.
• Below: Displays Other Non-Threat and proximity traffic from 2700 feet
above the aircraft to 9000 feet below the aircraft. Typically used during
descent phase of flight.
• UNREST (unrestricted): All traffic is displayed from 9900 feet above
and 9900 feet below the aircraft.
3) To return to the Traffic Map Page, press the Back Softkey.
Displaying Motion Vectors
Enabling/disabling the Motion Vector display:
1) Select the Traffic Map Page.
2) Press the Motion Softkey.
3) Press one of the following softkeys:
• Absolute: Displays the motion vector pointing in the absolute
direction.
• Relative: Displays the motion vector relative to own aircraft
• Off: Disables the display of the motion vector.
Adjusting the duration for the Motion Vector projected time:
1) Select the Traffic Map Page.
2) Press the Motion Softkey.
3) Press the Duration Softkey.
4) Press a softkey for the desired duration (30 SEC, 1 MIN, 2 MIN, 5 MIN).
5) When finished, press the Back Softkey to return to the Traffic Map Page.
Showing additional traffic information:
1) Select the Traffic Map Page.
2) Press the FMS Knob. The first selected traffic symbol is highlighted in cyan.
Additional information appears in a window in the upper-right corner of the
Traffic Map Page.
130
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-02040-01 Rev. B
Advertisement
Table of Contents
