Table of Contents
Advertisement
Hazard Avoidance
VERTICAL SITUATION DISPLAY (VSD) TERRAIN
Enabling/Disabling the Vertical Situation Display (VSD):
1) Select the Navigation Map Page.
2) Press the Map Opt Softkey.
3) Press the Inset Softkey.
4) Press the VSD Softkey to enable or disable the VSD.
Enabling/Disabling VSD Relative Terrain on the Navigation Map
(when VSD is enabled):
1) Select the Navigation Map Page.
2) Press the Map Opt Softkey.
3) Press the Terrain Softkey. Each selection cycles though an option displayed in cyan:
Off (disables terrain), Topo (to show topographical data) or REL (to show relative
terrain).
Selecting a VSD Mode:
1) Select the Navigation Map Page.
2) Press the Inset Softkey.
3) Press the VSD Softkey displaying the VSD mode in cyan. Each press of the
softkey cycles through a mode selection: FPL (flight plan), TRK (track), or
Auto.
Customizing the Track Mode Boundary display on the Navigation
Map Page:
1) Select the Navigation Map Page.
2) Press the MENU Key.
3) With 'Map Settings' highlighted, press the ENT Key.
4) Turn the small FMS Knob to select the 'VSD' Group and press the ENT Key.
5) Turn the large FMS Knob or press the ENT Key to scroll through product
selections.
• TRK Mode BNDRY – Enables/disables the display of the Track Mode
Boundary and sets maximum range at which Track Mode Boundary is
shown.
6) Turn the small FMS Knob to scroll through options (ON/OFF, range settings).
7) Press the ENT Key to select an option.
120
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-02040-01 Rev. B
Advertisement
Table of Contents
