Table of Contents
Advertisement
4) Press the ENT Key to activate the flight plan leg. To cancel, press the CLR
Key, or highlight 'Cancel' and press the ENT Key.
5) Press the FMS Knob to remove the flashing cursor.
Along Track Offsets
Entering an along track offset distance:
1) Press the FPL Key to display the 'FPL - Active Flight Plan' Page (MFD) or the
'Flight Plan' Window (PFD).
2) Press the FMS Knob to activate the cursor (not required on the PFD) and
turn the large FMS Knob to highlight the waypoint for the along track
offset.
3) Press the ATK OFS Softkey (MFD only); or press the MENU Key, highlight
'Create ATK Offset Waypoint', and press the ENT Key.
4) Enter a positive or negative offset distance in the range of +/- 1 to 999 nm
(limited by leg distances).
5) Press the ENT Key to create the offset waypoint.
6) Press the FMS Knob to remove the flashing cursor.
Parallel Track
Activating parallel track:
1) Press the FPL Key to display the 'FPL - Active Flight Plan' Page (MFD) or the
'Flight Plan' Window (PFD).
2) Press the MENU Key, highlight 'Parallel Track', and press the ENT Key. The
'Parallel Track' Window is displayed with the 'Direction' Field highlighted.
3) Turn the small FMS Knob to select 'LEFT' or 'RIGHT' and press the ENT Key.
The 'Distance' Field is highlighted.
4) Turn the small FMS Knob to enter a distance from 1-99 nm and press the
ENT Key. 'Activate Parallel Track' is highlighted.
5) Press the ENT Key to activate parallel track. Press the FMS Knob or the
CLR Key to cancel the parallel track activation.
Cancelling parallel track:
1) Press the FPL Key to display the 'FPL - Active Flight Plan' Page (MFD) or the
Active 'Flight Plan' Window (PFD).
190-02040-01 Rev. B
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Flight Management
53
Advertisement
Table of Contents
