Table of Contents
Advertisement
Flight Management
5) Turn the FMS Knob to highlight 'Load Arrival'.
6) Press the ENT Key to load the arrival procedure into the active flight plan.
Loading an arrival procedure into a stored flight plan:
1) Select a stored flight plan from the 'FPL - Flight Plan Catalog' Page.
2) Press the Edit Softkey; or press the MENU Key, select 'Edit Flight Plan', and
press the ENT Key. The 'FPL - Stored Flight Plan' Page is displayed.
3) Press the LD STAR Softkey; or press the MENU Key, select "Load Arrival",
and press the ENT Key. The 'PROC - Arrival Loading' Page is displayed.
4) Select an arrival. Press the ENT Key.
5) Select a transition for the selected arrival. Press the ENT Key.
6) Select a runway served by the selected arrival, if required. Press the ENT
Key.
7) Press the ENT Key to load the selected arrival procedure.
Removing an Arrival from the Flight Plan
Removing an arrival from the active flight plan:
1) Press the FPL Key to display the 'FPL - Active Flight Plan' Page (MFD) or the
'Flight Plan' Window (PFD).
2) Press the MENU Key, and highlight 'Remove Arrival'.
3) Press the ENT Key. A confirmation window is displayed listing the arrival
procedure.
4) With 'OK' highlighted, press the ENT Key. To cancel the removal request,
highlight 'CANCEL' and press the ENT Key.
Removing an arrival from a stored flight plan:
1) Press the FPL Key to display the 'FPL - Active Flight Plan' Page.
2) Turn the small FMS Knob clockwise one click to display the 'FPL - Flight
Plan Catalog' Page.
3) Press the FMS Knob to activate the cursor and turn the FMS Knob to
highlight the flight plan to be edited.
4) Press the EDIT Softkey; or press the MENU Key, select 'Edit Flight Plan' and
press the ENT Key. The 'FPL - Stored Flight Plan' Page is displayed.
72
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-02040-01 Rev. B
Advertisement
Table of Contents
