Table of Contents
Advertisement
Flight Instruments
Changing the selected GPS CDI setting:
1) Use the FMS Knob to select the 'Aux - System Setup 1' Page on the MFD.
2) If necessary, press the Setup 1 Softkey to display the 'Aux - System Setup
1' Page.
3) Press the FMS Knob to activate the cursor.
4) Turn the large FMS Knob to highlight the Format Allowed selection in the
GPS CDI box.
5) Turn the small FMS Knob to highlight the desired setting and press the
ENT Key.
6) To cancel the selection, press the FMS Knob or the CLR Key.
Enabling/disabling OBS Mode while navigating a GPS flight plan:
1) Press the OBS Softkey to select OBS Mode.
2) Turn the CRS Knob to select the desired course to/from the waypoint. Press
the CRS Knob to synchronize the Selected Course with the bearing to the
next waypoint.
3) Press the OBS Softkey again to return to automatic waypoint sequencing.
GARMIN SVT (SYNTHETIC VISION TECHNOLOGY)
WARNING: Use appropriate primary systems for navigation, and for terrain,
obstacle, and traffic avoidance. SVT is intended as an aid to situational awareness
only and may not provide either the accuracy or reliability upon which to solely
base decisions and/or plan maneuvers to avoid terrain, obstacles, or traffic.
NOTE: Do not use the flight path marker as a flight director.
Activating and deactivating SVT:
1) Press the PFD Opt Softkey.
2) Press the SVT Softkey.
3) Press the Terrain Softkey. The SVT display will cycle on or off with each
press of the Terrain Softkey.
4) Press the Back Softkey twice to return to the top-level softkeys.
8
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-02040-01 Rev. B
Advertisement
Table of Contents
