Table of Contents
Advertisement
10) Press the ENT Key while 'Load?' is highlighted to insert the hold into the
flight plan.
Creating a user-defined hold at the aircraft present position:
1) Press the FPL Key to display the 'FPL - Active Flight Plan' Page (MFD) or the
Active 'Flight Plan' Window (PFD).
2) Press the MENU Key, highlight 'Hold At Present Position', and press the
ENT Key. The 'Hold at' Window appears with the course field highlighted.
3) If desired, use the FMS Knobs to edit the entry course, and press the ENT
Key.
4) Use the small FMS Knob to select 'Inbound' or 'Outbound' course direction,
and press the ENT Key.
5) Use the small FMS Knob to select 'Time' or 'Distance' length mode, and
press the ENT Key.
6) Use the FMS Knobs to edit the length, and press the ENT Key.
7) Use the small FMS Knob to select 'Right' or 'Left' turn direction, and press
the ENT Key.
8) Use the FMS Knobs to edit the Expect Further Clearance Time (EFC Time),
and press the ENT Key.
9) Press the ENT Key while 'Activate?' is highlighted to create an Offroute
Direct-to hold waypoint at the aircraft present position and activate the
hold.
Creating a user-defined hold at a direct-to waypoint:
1) Press a Direct-to Key and set up the direct-to waypoint as desired, but
select 'Hold?' instead of 'Activate?' when finished (MFD or PFD).
2) Use the FMS Knobs to edit the entry course, and press the ENT Key.
3) Use the small FMS Knob to select 'Inbound' or 'Outbound' course direction,
and press the ENT Key.
4) Use the small FMS Knob to select 'Time' or 'Distance' length mode, and
press the ENT Key.
5) Use the FMS Knobs to edit the length, and press the ENT Key.
6) Use the small FMS Knob to select 'Right' or 'Left' turn direction, and press
the ENT Key.
7) Use the FMS Knobs to edit the Expect Further Clearance Time (EFC TIME),
and press the ENT Key.
190-02040-01 Rev. B
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Flight Management
55
Advertisement
Table of Contents
