Table of Contents
Advertisement
Displaying Data Link Weather products on the PFD:
1) On the PFD, press the Map/HSI Softkey.
2) Press the desired weather product softkey(s) to enable/disable the display
of data link products on the PFD map.
3) To enable/disable a data link lightning weather product on a PFD, press the
Lightning Softkey.
a) Press the Datalink Softkey to enable data link lightning or press the
LTNG Off Softkey.
b) Press the Back Softkey twice to return to the top-level PFD Softkeys.
Enabling/disabling the weather product icon and age display (PFD
maps):
1) On the PFD, press the Map/HSI Softkey.
2) Press the WX LGND Softkey to enable/disable the weather product age,
source, and icon box display on PFD Maps.
CONNEXT DATA REQUESTS
Manually Requesting Garmin Connext Weather information:
1) Select the 'Map - Weather Data Link (CNXT)' Page.
2) Press the MENU Key.
3) With 'Connext Data Request' highlighted, press the ENT Key.
4) Turn the large FMS Knob to highlight the desired coverage option(s) and
press the ENT Key to show or hide a green check mark to select one of
more of the following coverage selections:
• Present Position – Requests data based on current location.
• Destination – Requests data based on the active flight plan
destination (Direct-To destinations excluded). See the Flight
Management section for more information about entering and
activating flight plans.
• FPL – Requests data along an active flight plan, if one currently
exists. Turn the small FMS Knob to select the desired flight plan
look-ahead distance option (or choose 'Remaining FPL' to request
weather data for the remainder of the flight plan), then press the
ENT Key.
190-02040-01 Rev. B
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Hazard Avoidance
95
Advertisement
Table of Contents
