Wifi Connections - Garmin Beechcraft 200 Series Cockpit Reference Manual

WIFI CONNECTIONS

The optional WiFi Datalink provides a high speed IEEE 802.11g WiFi datalink be-
tween the aircraft and a ground computer network while the aircraft is on the ground and
located within range of the network.
Viewing the WiFi Setup Page:
1) Turn the large FMS Knob on the MFD to select the 'Aux' Page Group.
2) Turn the small FMS Knob to select the 'Aux - Maintenance WiFi Setup'
Page.
Setting up a new WiFi connection:
1) Press the Avail Softkey on the MFD. A list of available networks will be
displayed in the Available Networks window. Signal strength is shown for
each network, as well as security requirements and whether the network
has been saved in the system's memory.
2) If necessary, press the Rescan Softkey to have the system scan again for
available networks.
3) Press the FMS Knob to place the cursor in the list of networks.
4) Turn either FMS Knob to select the desired network.
5) Press the Connect Softkey.
6) If the network is secured, a window will be displayed in order to enter
the necessary passcode. Use the FMS Knobs to enter the desired alpha
numeric characters. Press the CapsLock Softkey to enter upper case
letters. If there is no security associated with the network, proceed to step
9.
7) Press the ENT Key. 'OK' will be highlighted.
8) Press the ENT Key again.
9) The Save Settings window is now displayed with the cursor highlighting
'Save Connection.'
10) The selected network can be saved to system memory to make re-
connection easier at a later time.
Connecting the selected network without saving:
a) Turn the large FMS Knob to move the cursor to highlight 'Connect.'
b) Press the ENT Key.
190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Additional Features
159