Table of Contents
Advertisement
Annunciations & Alerts
Message
SCHEDULER [#] – <message>.
SLCT FREQ – Select appropriate
frequency for approach.
SLCT MAG – Select MAGNETIC NAV
ANGLE display units.
SLCT NAV – Select NAV on CDI for
approach.
SLCT NON-MAG – Select alternate
NAV ANGLE display units.
STEEP TURN – Steep turn ahead.
STRMSCP FAIL – Stormscope has
failed.
SURFACEWATCH DISABLED –
Too far north/south.
SURFACEWATCH FAIL – Invalid
audio configuration.
SURFACEWATCH FAIL – Invalid
configurable alerts.
SURFACEWATCH FAIL – One or
more inputs invalid.
SURFACEWATCH INHIBITED –
Surfacewatch inhibited.
SVT – SVT DISABLED: Out of
available terrain region.
SVT – SVT DISABLED: Terrain DB
resolution too low.
TERRAIN AUD CFG – Trn
Awareness audio config error. Service
req'd.
TERRAIN DISABLED – Terrain
Awareness DB resolution too low.
TERRAIN DSP – [PFD1, PFD2 or
MFD1] Terrain awareness display
unavailable.
TIMER EXPIRD – Timer has expired. The system notifies the pilot that the timer has expired.
212
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Comments
Message criteria entered by the user.
The system notifies the pilot to load the approach frequency for
the appropriate NAV receiver. Select the correct frequency for
the approach.
The Navigation angle is non-magnetic. Select the MAGNETIC
NAV ANGLE display units.
The system notifies the pilot to set the CDI to the correct NAV
receiver. Set the CDI to the correct NAV receiver.
The Navigation angle is magnetic. Select the alternate NAV
ANGLE display units.
A steep turn is 15 seconds ahead. Prepare to turn.
Stormscope has failed. The system should be serviced.
The SurfaceWatch system has been disabled.
The SurfaceWatch system has failed due to an invalid audio
configuration.
The SurfaceWatch system has failed due to invalid configurable
alerts.
The SurfaceWatch system has failed due to one or more invalid
inputs.
The SurfaceWatch system has been inhibited.
Synthetic Vision is disabled because the aircraft is not within the
boundaries of the installed terrain database.
Synthetic Vision is disabled because a terrain database of
sufficient resolution is not currently installed.
Terrain audio alerts are not configured properly. The system
should be serviced
TAWS is disabled because a terrain database of sufficient
resolution is not currently installed.
One of the terrain or obstacle databases required for TAWS in
the specified PFD or MFD is missing or invalid.
190-02040-01 Rev. B
Advertisement
Table of Contents
