Table of Contents
Advertisement
Flight Instruments
Adjusting the Selected Course:
Turn the CRS Knob to set the Selected Course.
Press the CRS Knob to re-center the CDI and return the course pointer to
the bearing of the active waypoint or navigation station (see OBS Mode for
adjusting a GPS course).
Changing the navigation angle setting:
1) Use the FMS Knob to select the 'Aux - System Setup 1' Page on the MFD.
2) If necessary, press the Setup 1 Softkey to display the System Setup 1 Page.
3) Press the FMS Knob to activate the cursor.
4) Turn the large FMS Knob to highlight NAV Angle setting in the Display Units
box.
5) Turn the small FMS Knob to highlight the desired setting and press the
ENT Key.
• True - References angles to true north (denoted with 'T')
• Magnetic - Angles corrected to the computed magnetic variation ('Mag
Var')
Directional Gyro (DG) Mode (GRS 7800 Installations Only)
Selecting DG Mode:
1) Press the PFD Opt Softkey.
2) Press the Sensors Softkey.
3) Press the HDG Softkey.
4) Press the DG Slave Softkey to activate DG mode. Press the DG Free
Softkey to deactivate DG mode.
5) Press the Back Softkey three times to return to the top-level softkeys.
The HDG-, HDG+, HDG SYNC, and TRACK SYNC keys are enabled, and can be oper-
ated as follows:
• Pressing the HDG- Softkey or the HDG+ Softkey to slew the heading up or down.
• Pressing the HDG SYNC Bug softkey to synchronize the heading to the current
selected heading
• Pressing the TRACK SYNC softkey to synchronize the heading to the current track
6
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-02040-01 Rev. B
Advertisement
Table of Contents
