Table of Contents
Advertisement
8) Enter the desired email address. Entry can be accomplished through
the alphanumeric keys on the MFD Controller, or the FMS Knobs on the
controller or the MFD.
9) Press the ENT Key. The Save Button is highlighted.
10) Press the ENT Key. The new contact entry is added to the list of saved
contacts.
Deleting a contact:
1) With the 'Aux - Telephone' Page displayed, press the FMS Knob to display
the cursor.
2) Turn either FMS Knob to place the cursor on the desired contact name.
3) Press the Delete Softkey. A confirmation window is displayed.
4) With 'OK' highlighted, press the ENT Key to delete the selected contact.
Editing a contact:
1) With the 'Aux - Telephone' Page displayed, press the FMS Knob to display
the cursor.
2) Turn either FMS Knob to place the cursor on the desired contact name.
3) Press the Edit Softkey. The cursor is placed in the 'Name' field. Enter the
desired changes. Entry can be accomplished through the alphanumeric keys
on the MFD Controller, or the FMS Knobs on the controller or the MFD.
4) Press the ENT Key when each field is complete. The Save Button is now
highlighted.
5) Press the ENT Key to save the changes.
Incoming Calls
NOTE: The Push-to-Talk Switch is not utilized for telephone communication.
The microphone is active after pressing the Answer Softkey, and stays active
until the call is terminated.
Answering an incoming call in the cockpit:
1) Press the TEL Key on the appropriate audio panel.
2) Press the Answer Softkey on the MFD.
Pressing the Ignore Softkey will extinguish the pop-up window and leave the call
unanswered. Pressing the Phone Softkey will display the 'Aux - Telephone' Page allowing
additional call information to be viewed before answering.
190-02040-01 Rev. B
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Additional Features
151
Advertisement
Table of Contents
