Table of Contents
Advertisement
Auto-tuning a NAV frequency from the WPT and NRST Pages:
1) From any page that the NAV frequency can be auto-tuned, activate the
cursor by pressing the FMS Knob or the appropriate softkey.
2) Turn the FMS Knob to place the cursor on the desired NAV identifier or
NAV frequency.
3) On the Nearest VOR and Nearest Airports pages, press the FREQ Softkey to
place the cursor on the NAV frequency.
4) Press the ENT Key to display the 'Load Frequency' Window.
5) Turn the FMS Knob to place the cursor on the desired NAV frequency field.
6) Press the ENT Key to load the NAV frequency into the selected NAV
frequency field.
Selecting DME transceiver pairing:
1) Press the DME Softkey to display the DME Tuning Window.
2) Turn the small
ENT
3) Press the
MODE S TRANSPONDERS
GTX 33D/335R/345R Transponder Controls
Selecting and activating Transponder 1 or Transponder 2:
1) Press the XPDR Softkey to display the Transponder Mode Selection Softkeys.
2) Press the XPDR1 Softkey or the XPDR2 Softkey to select and activate the
desired transponder.
GTX 33D/335R/345R Transponder Mode Selection
Selecting a transponder mode:
1) Press the XPDR Softkey to display the Transponder Mode Selection Softkeys.
2) Press the XPDR1 or XPDR2 Softkey to select the active transponder.
3) Press the desired softkey to activate the transponder mode.
The ON indication and transponder code in the Transponder Data Box will appear
green while airborne and white while on the ground.
190-02040-01 Rev. B
FMS
Knob to select the DME tuning mode.
Key to complete the selection.
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Nav/Com/XPDR/Audio Panel
17
Advertisement
Table of Contents
