Garmin Beechcraft 200 Series Cockpit Reference Manual page 120

Hazard Avoidance
• Waypoint – Requests data based on a waypoint (which may be
off-route). Turn the large and small FMS Knobs to enter a waypoint,
then press the ENT Key.
5) Turn the large FMS Knob highlight to the 'Diameter / Route Width' distance
field and turn the small FMS Knob to select the desired diameter and route
width of the request, then press the ENT Key.
6) Turn the large FMS Knob until the 'Send Request' field is highlighted. Press
the ENT Key to initiate the request immediately or press the FMS Knob to
return to the 'Map - Weather Data Link (CNXT)' Page without requesting
weather data.
Cancelling a Connext Data Request in Progress:
1) Select the 'Map - Weather Data Link (CNXT)' Page.
2) Press the MENU Key.
3) With 'Connext Data Request' highlighted, press the ENT Key.
4) Turn the large FMS Knob to select the 'Cancel Request' field and press the
ENT Key. The request status box indicates 'Request Cancelled'.
5) Press the FMS Knob to return to the 'Map - Weather Data Link (CNXT)'
Page.
Enabling/disabling automatic Connext Data Requests:
1) Select the 'Map - Weather Data Link (CNXT)' Page.
2) Press the MENU Key.
3) With 'Connext Data Request' highlighted, press the ENT Key.
4) Choose the desired weather coverage options.
5) Turn the large FMS Knob to select the 'Update Rate' field. Then turn the
small FMS Knob to highlight the desired automatic update frequency (Off,
5 Min, 10 Min, 15 Min, 20 Min, 30 Min, 45 Min, or 60 Min), then press the
ENT Key.
6) The 'Send Request' field is highlighted and a countdown timer is displayed
in the 'Request Status' Window based on the currently selected update
rate. Press the ENT Key to immediately send an immediate Connext Data
Request.
Or:
Press the FMS Knob to return to the 'Map - Weather Data Link (CNXT)'
Page.
96 Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-02040-01 Rev. B