Garmin Beechcraft 200 Series Cockpit Reference Manual page 234

Annunciations & Alerts
Message
PFD1 CARD 1 REM – Card 1 was
removed. Reinsert card.
PFD1 CARD 2 ERR – Card 2 is
invalid.
PFD1 CARD 2 REM – Card 2 was
removed. Reinsert card.
PFD1 DB ERR – MFD1 obstacle
database error exists.
PFD1 DB ERR – PFD1 multiple
database errors exists.
PFD1 DB ERR – PFD1 obstacle
database missing.
PFD1 DB ERR – PFD1 terrain
database error exists.
PFD1 DB ERR – PFD1 terrain
database missing.
PFD1 KEYSTK – PFD1 [key name]
Key is stuck.
PFD1 SERVICE – PFD1 needs
service. Return unit for repair.
PFD1 SOFTWARE – PFD1
mismatch, communication halted.
PFD1 VOLTAGE – PFD1 has low
voltage. Reducing power usage.
PF2 BACKLIGHT CAL – PFD2
calibration lost. Return for repair.
PFD2 CARD 1 ERR – Card 1 is
invalid.
PFD2 CARD 1 REM – Card 1 was
removed. Reinsert card.
PFD2 CARD 2 ERR – Card 2 is
invalid.
210 Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Comments
The SD card was removed from the top card slot of the specified
PFD. The SD card needs to be reinserted.
The SD card in the bottom card slot of the specified PFD
contains invalid data.
The SD card was removed from the bottom card slot of the
specified PFD. The SD card needs to be reinserted.
The PFD detected a failure in the obstacle database. Reload
databases with new data card. If problem persists, delete
databases and reload with a new card
The PFD detected a failure in more than one database. Reload
databases with new data card. If problem persists, delete
databases and reload with a new card
The obstacle database is present on another LRU, but is missing
on the specified LRU.
The PFD detected a failure in the terrain database. Reload
databases with new data card. If problem persists, delete
databases and reload with a new card.
The terrain database is present on another LRU, but is missing
on the specified LRU. Reload databases with new data card. If
problem persists, delete databases and reload with a new card.
A key is stuck on the PFD bezel. Attempt to free the stuck key
by pressing it several times. The system should be serviced if the
problem persists.
The PFD1 self-test has detected a problem. The system should
be serviced.
The specified GDU has different software versions installed. The
system should be serviced.
The PFD1 voltage is low. The system should be serviced.
The PFD backlight calibration cannot be found or is invalid. The
system should be serviced.
The SD card in the top card slot of the specified PFD contains
invalid data.
The SD card was removed from the top card slot of the specified
PFD. The SD card needs to be reinserted.
The SD card in the bottom card slot of the specified PFD
contains invalid data.
190-02040-01 Rev. B