Table of Contents
Advertisement
3) To select a different aircraft symbol, turn the FMS Knob to move the cyan
bracket until the selected aircraft traffic symbol is highlighted.
4) When finished, press the FMS Knob again to disable the traffic selection.
Changing the display range on the Traffic Map Page:
1) Turn the Joystick.
2) The following range options are available:
• 750 ft
• 750 ft and 1500 ft
• 1500 ft and 0.5 nm
• 0.5 nm and 1 nm
• 1 nm and 2 nm
• 2 and 6 nm
• 6 and 12 nm
• 12 and 24 nm
• 24 and 40 nm
ADS-B SYSTEM STATUS
Viewing ADS-B Traffic Status:
1) Turn the large FMS Knob to select the AUX Page Group.
2) Turn the small FMS Knob to select the AUX - ADS-B Status Page.
TCAS II TRAFFIC
WARNING: Traffic information shown on system displays is provided as an
aid in visually acquiring traffic. Traffic avoidance maneuvers are based upon
TCAS II Resolution Advisories, ATC guidance, or positive visual acquisition of
conflicting traffic.
WARNING: Do not rely solely upon the display of traffic information to
accurately depict all of the traffic information within range of the aircraft.
Due to lack of equipment, poor signal reception, and/or inaccurate information
from other aircraft, traffic may be present but not represented on the displays.
190-02040-01 Rev. B
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Hazard Avoidance
131
Advertisement
Table of Contents
