Garmin Beechcraft 200 Series Cockpit Reference Manual page 137

Hide thumbs Also See for Beechcraft 200 Series:
Table of Contents

Advertisement

Enabling/disabling Sector Scanning:
1) While in horizontal scan mode, press the BRG Softkey to display the
Bearing Line and place the cursor in the BEARING field. If the Bearing Line
is not displayed, press the MENU Key and turn the large FMS Knob to
select Show Bearing Line.
2) Press the ENT Key.
3) Turn the small FMS Knob to place the Bearing Line in the desired position.
The location of the Bearing Line becomes the center point of the Sector
Scan.
4) Turn the large FMS Knob to place the cursor in the Sector Scan field.
5) Turn the small FMS Knob to highlight the desired scan. Selecting 'Full'
enables a 90º scan (GWX 68) or 120º scan (GWX 70/75).
6) If desired, readjust the Bearing Line as discussed previously to change the
center of the Sector Scan.
7) Press the BRG Softkey again to remove the Bearing Line and cursor. The
bearing reference is reset to 0º.
Turbulence Detection
The optional Turbulence Detection feature, available with the GWX 70/75, identifies
areas of turbulence associated with precipitation using the color magenta (GWX 70) or
white (GWX 75) during a horizontal scan. The magenta or white areas represent precipi-
tation moving at a high rate of speed either toward or away from the radar antenna, using
Doppler radar measurements. This feature cannot detect areas of Clear Air Turbulence.
Enabling/Disabling Turbulence Detection during a Horizontal Scan:
1) Select the 'Map - Weather Radar' Page.
2) With the radar in weather mode, press the Features Softkey.
3) To activate or deactivate the turbulence detection feature, press the TURB
Softkey. Turbulence detection is enabled when the softkey annunciator is
green; turbulence detection is disabled when the softkey annunciator is
gray. The system indicates the current turbulence detection feature status
in the upper right of the 'Map - Weather Radar' Page.
Weather Attenuated Color Highlight (WATCH
To activate or deactivate the WATCH feature, press the WATCH Softkey.
190-02040-01 Rev. B
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Hazard Avoidance
)
113

Advertisement

Table of Contents
loading

This manual is also suitable for:

Beechcraft b200 seriesG1000 nxi

Table of Contents