Text Messaging (Sms) - Garmin Beechcraft 200 Series Cockpit Reference Manual

Making an external call from the cockpit by using the Contact List:
1) Press the TEL Key on the appropriate audio panel.
2) Press the FMS Knob to activate the cursor.
3) Turn the small FMS Knob to select the desired contact name in the list of
contacts.
4) Press the Call Softkey. The external call is initiated and the number
associated with the contact name is dialed.
Placing The Cockpit Phone on Hold
Placing a call on hold:
Press the Hold Softkey on the MFD.
Transferring a Call from the Cockpit
Transferring a call:
1) Press the Trans Softkey on the MFD.
2) Press the ENT Key. The cursor now highlights the phone number entry
field.
3) Enter the phone number to which the call is being transferred, as discussed
earlier for making an external call on the Iridium satellite network.
4) Press the ENT Key. 'OK' is now highlighted.
5) Press the ENT Key again to place the call.
Making a Conference Call from the Cockpit
Adding another phone to an active call:
1) Press the Conf Softkey on the MFD.
2) Press the ENT Key. The cursor now highlights the phone number entry
field.
3) Enter the phone number to be added to the call, as discussed earlier for
making an external call on the Iridium satellite network.
4) Press the ENT Key. 'OK' is now highlighted.
5) Press the ENT Key again to place the call.

TEXT MESSAGING (SMS)

Viewing the Text Messaging Page:
1) Turn the large FMS Knob on the MFD to select the 'Aux' Page Group.
190-02040-01 Rev. B Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
Additional Features
153