Table of Contents
Advertisement
Additional Features
Saving and connect the selected network:
a) Press the ENT Key. A checkmark is placed in the check box and the
cursor moves to the airport field.
b) Using the FMS Knobs, enter an airport identifier to be associated with
the saved network. This aids in identifying the network later in the
event of duplicate network names.
c) Press the ENT Key. The cursor moves to 'Connect.'
d) Press the ENT Key again to connect to the selected network.
Editing a saved network:
1) While viewing list of saved networks, press the FMS Knob to activate the
cursor.
2) Turn either FMS Knob to highlight the network to be edited.
3) Pressing the ENT Key at this point will check or uncheck the Auto Connect
check box. When a checkmark is present, the system will automatically
connect to the network when within range.
4) Press the Edit Softkey. The cursor now appears in the Connection Settings
window.
5) Turn the large FMS Knob to select the network attribute to be edited.
6) Turn the small FMS Knob to begin editing the field.
7) When the entry is complete, press the ENT Key.
8) Turn the large FMS Knob or press the ENT Key until 'Save' is highlighted.
9) Press the ENT Key.
Disconnecting a WiFi network:
Press the DISCNCT Softkey.
Deleting a saved WiFi network:
1) While viewing the list of saved networks, press the FMS Knob to activate
the cursor.
2) Turn either FMS Knob to highlight the network to be deleted.
3) Press the Delete Softkey. The selected network is removed from the list.
160
Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-02040-01 Rev. B
Advertisement
Table of Contents
