3. Windows NT 4.0 Print Server Configuration
To use a printer connected to the Ethernet interface, click [SmartNetMonitor] or [LPR Port] when install-
ing the printer driver.
• SmartNetMonitor
See
p.52 "Configuring
Printer
Driver", and
• LPR Port
See
p.52 "Configuring
"Installing the PostScript Printer
Note
If you want to use "LPR Port", "Microsoft TCP/ IP Printing" must be installed. For details, see Win-
dows NT Help.
Configuring Protocols
Configuring TCP/IP and IPP for Printing
This describes how to configure the network interface board and Windows NT to use TCP/IP and IPP.
Configuring the printer
Configure the printer to use TCP/IP.
• Check TCP/IP is set to active. (The factory default is active.)
• Assign an IP address and make other settings required for TCP/IP.
Operating Instructions
Protocols",
p.56 "Installing
p.62 "Installing the PostScript Printer
Protocols",
p.57 "Installing the PCL 5c or RPCS Printer
Driver".
Administrator Reference
Software",
p.57 "Installing the PCL 5c or RPCS
Driver".
52
Driver", and
p.62