Ricoh CL7000 Operating Instructions Manual page 245

Message
Print queue <print queue name> cannot be serviced by
printer 0, <print server name>
Print server <print server name> has no printer.
Print session full
Printer <printer name> has no queue
pserver start. (NetWare)
Required computer name (<Computer name>) is dupli-
cated name
Required file server (<file server name>) not found
restarted.
sap enable, saptype=<SAP type>, sapname=<SAP
name>
Set context to <NDS context name>
shutdown signal received. network service rebooting...
Operating Instructions
Causes and solutions
(In print server mode) The print queue name cannot be
serviced. Make sure that print queue volume exists on the
specified file server.
(In print server mode) The printer object is not assigned
to the print server <print server name>. Using NWadmin,
assign the printer object, and then restart the printer de-
vice.
Cannot accept the print session.
(In print server mode) The print queue is not assigned to
the printer. Using NWadmin, assign the print queue to the
printer, and then restart it.
(In print server mode) NetWare service has started.
The same computer name is detected on the network. The
start job determines the computer name by adding the
computer name to the suffix (0,1....). Configure a new
computer name that is unique.
Cannot find the required file server.
LPD has started.
The SAP function has started. The SAP (SAP type and
SAP name) packet is issued to advertise the service on the
SAP table on the NetWare server.
A <NDS context name> has been set.
Rebooting the network service.
Administrator Reference
245