Ricoh CL7000 Operating Instructions Manual page 46

LPR Port
A In [Create a new Port:], click [LPR Port], and then click [Next>].
B In the [Name or address of server providing lpd] box, enter the printer's IP address.
C In the [Name of printer or print queue on that server] box, enter "lp", and then click [OK].
I I I I
Confirm to select the name of the printer whose driver you want to install, and then click
[Next>].
J J J J
Change the name of the printer if you want, and then click [Next>].
Configure the default printer as necessary. Select the [Yes] check box to set the printer as the default
printer.
K K K K
Select the [Share name:] check box, and then click [Next>].
To change the printer name, use the [Share name: ] box.
L L L L
In the [Location and Comment] dialog box, enter the location and comment about the printer,
and then click [Next>].
M M M M
Select whether or not you want to print a test page, and then click [Next>].
N N N N
Click [Finish].
Printer driver installation starts.
Note
During installation, the [Hardware Installation] dialog box may appear. In this case, click [Continue
Anyway] to continue the installation.
Operating Instructions Administrator Reference
46