Message List; System Log Information - Ricoh CL7000 Operating Instructions Manual

Message List

This is a list of messages written in the printer's system log. The system log can be viewed using the
"syslog" command.

System Log Information

You can use the following methods to view the system log:
• telnet: Use the "syslog" command. See
Message
Access to NetWare server <file server name> denied. Ei-
ther there is no account for this print server on the Net-
Ware server or the password was incorrect.
add_sess: community<community name> already de-
fined.
add_sess: session<community name>already defined.
add_sess: bad trap addr:<IpAddress>, community:<com-
munity name>
add_sess_ipx: bad trap addr: <IPX address>, communi-
ty:<community name>
add_sess_ipx: community <community name> already
defined.
Operating Instructions
p.195 "Commands
Causes and solutions
(In print server mode) Cannot log on to the file server.
Make sure the print server is registered on the file server.
If a password is specified for the print server, delete it.
The same community name already exists. Use another
one.
The requested community name is not defined.
The IP address (0.0.0.0.) is unavailable if the community
access type is TRAP. Specify the host IP address for the
TRAP destination.
The IPX address (00:00:00:00:00:00) is unavailable if the
community access type is TRAP. Specify the host IPX
address for the TRAP destination.
The same community name already exists. Use another
one.
Administrator Reference
List".
239