Ricoh CL7000 Operating Instructions Manual page 147

E E E E
Press the { { { { Enter #} } } } key.
One of the following messages appears on the display:
WL.LAN Signal
Good
WL.LAN Signal
Fair
WL.LAN Signal
Poor
WL.LAN Signal
Unavailable
Note
If "WL.LAN Signal" is not displayed, "IEEE 802.11b" has not been selected for "LAN Type" in
"Network Setup" of the Host Interface menu. Select "IEEE 802.11b" for "LAN Type", and then
check the "WL.LAN Signal" in the Maintenance menu again.
If "802.11 Ad hoc" or "Ad hoc" in "Comm. Mode" of "IEEE 802.11b" in the Host Interface menu is
selected, you cannot check the signal. Select "Infrastructure", and then check it again.
Every time you press the { { { { Enter #} } } } key, the signal is refreshed.
The signal is indicated as "Good" if the signal strength is 76-100%, "Fair" is 41-75%, "Poor" is
21-40%, and "Unavailable" if strength is 0-20%. If signal is unstable or unavailable, remove ob-
stacles or move the printer to a place where the signal can be received.
Using wireless devices or microwave sources near the printer might affect the signal.
Operating Instructions
100%
50%
30%
18%
Administrator Reference
147