Getting Printer Information over the Network
Printer current status
You can check the printer's status using the "telnet" command.
telnet
Use the "status" command.
Message
Calibrating
Call Service Center
Duplex Cover Open
Empty: Black Toner
Empty: Cyan Toner
Empty: Magenta Toner
Empty: Yellow Toner
Energy Saver Mode
Error: DIMM
Error: Ethernet
Error: Finisher
Error: HDD
Error: IEEE1394
Operating Instructions
The printer is calibrating, or the photoconductor unit is being supplied.
There is a malfunction in the printer.
The optional duplex unit cover is open.
The toner cartridge is almost empty.
The toner cartridge is almost empty.
The toner cartridge is almost empty.
The toner cartridge is almost empty.
The printer is in Energy Saver Mode.
An error has occurred in the optional DIMM.
An error has occurred in the Ethernet interface.
An error has occurred in the optional finisher.
An error has occurred in the optional Printer Hard Disk.
An error has occurred in the IEEE 1394 interface.
Administrator Reference
Description
222