Configuring The Network Interface Board Settings - Ricoh CL7000 Operating Instructions Manual

2.
Menu buttons
Use to configure the network interface board and
confirm printer status.
Note
When you click [Network Config], a dialog
box appears requesting the user name and
password. Enter only the password in this
dialog box. The factory default password is
"password".

Configuring the Network Interface Board Settings

A A A A
Start the Web browser.
B B B B
Point your browser at the URL or IP address of the printer (e.g. http://XXX.XXX.XXX.XXX
where the Xs are the number of the IP address).
The status of the chosen printer appears on the Web browser.
C C C C
Click [Configuration].
The dialog box for entering the password and user name is displayed.
D D D D
Enter your user name and password, and then click [OK].
To use the factory default account, enter no user name and enter "password" for the password.
Operating Instructions
3.
Status
Displays printer status, and network interface
board, name and comments.
Administrator Reference
The password is the same as that used for
remote maintenance and NIB Setup Tool. If
you change a password with the Web
b r o w s e r , o t h e r p a s s w o r d s a r e a l s o
changed.
108