Ricoh CL7000 Operating Instructions Manual page 74

Note
In most situations, use the default setting ("Auto "). When you first select "Auto ", the frame type
first detected by the printer is adopted. If the network can use more than two frame types, the
printer may fail to select the correct frame type if "Auto " is selected. In this case, select the ap-
propriate frame type.
A Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to display "Frame Type (NW)".
Network Setup:
Frame Type (NW)
B Press the { { { { Enter #} } } } key.
The current setting appears on the display.
Frame Type (NW):
*Auto
C Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to display the frame type you want to use.
D Press the { { { { Enter #} } } } key.
In about two seconds, the display returns to "Network Setup".
E Press the { { { { On Line} } } } key.
"Ready" appears on the display.
Ready
Operating Instructions Administrator Reference
74