Ricoh CL7000 Operating Instructions Manual page 196

TCP/IP address
Use the "ifconfig" command to configure TCP/IP (IP address, subnet mask, broadcast address, default
gateway address) for the machine.
Reference
msh> ifconfig
Configuration
msh> ifconfig interface_name parameter address
Interface name
ether
naf0
*2
ip1394
*2
fwip0
*3
wlan
*3
wi0
*1
If you did not enter the interface name, it will be automatically set to the Ethernet interface.
*2
Available when the optional 1394 interface unit is installed.
*3
You can specify an interface when installing the optional 802.11b interface unit.
Parameter
(no parameter)
netmask
broadcast
Operating Instructions
Interface to be configured
*1
Ethernet Interface
IEEE 1394 Interface
IEEE 802.11b Interface
Meaning
IP address
Subnet mask
Broadcast address
Administrator Reference
196