Ricoh CL7000 Operating Instructions Manual page 29

B B B B
Click the [Ports] tab, and then click [Configure Port].
The [Port Configuration:] dialog box appears.
Note
If you cannot set items on the [Recovery/Parallel Printing] tab, follow the procedure below.
A
Click [Cancel] to close the [Port Configuration:] dialog box.
B
Start SmartNetMonitor for Client, and then right-click the SmartNetMonitor for Client icon on
the taskbar.
C
Click [Extended Features Settings], and then select the [Set Recovery/Parallel Printing for each port]
check box.
D
Click [OK] to close the [Extended Features Settings] dialog box.
• For IPP, you can configure User Settings, Proxy Settings, and Timeout Settings.
Note
For more information about these settings, see SmartNetMonitor for Client Help.
Operating Instructions Administrator Reference
29