Ricoh CL7000 Operating Instructions Manual page 246

Message
smbd start. (NetBEUI)
Snmp over ip is ready.
Snmp over IP over 1394 is ready.
Snmp over ipx is ready.
snmpd start.
started.
The print server received error <error number> during at-
tempt to log in to the network. Access to the network was
denied. Verify that the print server name and password
are correct.
win2kspd protocol-DOWN (APPEXIT).
win2kspd protocol-UP (APPENTRY).
win2kspd started.
WINS name refresh :Server No Response
Operating Instructions
Causes and solutions
An smbd (SMB (Server Message Block) service) has
started.
Communication over TCP/IP with SNMP is available.
Communication over IP over 1394 with SNMP is availa-
ble.
Communication over IPX with SNMP is available.
SNMP service has started.
Direct print service has started.
Cannot log on to the file server. The print server is not
registered or the password is specified. Register the print
server without specifying a password.
The NVRAM setting ioctl (SPIO CAPPEXIT) of device
SBP2TSP was set by protocol-DOWN.
SCSI print is not receiving data.
The NVRAM setting ioctl (SPIO CAPPENTRY) of de-
vice SBP2TSP was set by protocol-UP.
SCSI print is not receiving data.
SCSI print (SBP-2) service has started.
There was no response to the update request from the
server. Confirm the WINS server address is correct and
working properly.
Administrator Reference
246