Ricoh CL7000 Operating Instructions Manual page 203

Network interface board configuration settings information
Use the "show" command to display the network interface board configuration settings.
msh> show [-p]
Note
Add "-p" to the show command to have information displayed on screen at one time.
Reference
For more information about the meaning of data that is returned with this command, see
figuring the Network Interface
System log information
Use the "syslog" command to display information stored in the printer's system log.
msh> syslog
Reference
For more information about the displayed information, see
Operating Instructions
Board".
Administrator Reference
p.239 "System Log Information".
203
p.233 "Con-