Ricoh CL7000 Operating Instructions Manual page 250

• Under Windows 2000, clear the [Form feed] check box on the [NetWare Settings] tab in the printer
properties dialog box.
• Under Windows NT 4.0, clear the [Form feed] check box on the [NetWare Settings] tab in the printer
properties dialog box.
Banner Page
You should not configure a banner page on NetWare. If you want to change the banner page setting,
always configure it on Windows.
• Under Windows 95/98/Me, clear the [Enable banner] check box on the [Printer Settings] tab in the
printer properties dialog box.
• Under Windows 2000, clear the [Enable banner] check box on the [NetWare Settings] tab in the
printer properties dialog box.
• Under Windows NT 4.0, clear the [Enable banner] check box on the [NetWare Settings] tab in the
printer properties dialog box.
Printing after resetting the printer
After resetting the remote printer, it will be cut off from the print server for about 30-40 seconds before
reconnecting. Due to the NetWare specification, print jobs may be accepted, but not printed during this
interval.
When using the printer as a remote printer, wait about two minutes after resetting the printer before at-
tempting to print.
Operating Instructions Administrator Reference
250