Ricoh CL7000 Operating Instructions Manual page 163

Menu
Network Setup
Operating Instructions
DHCP
You can set how the network interface board acquires TCP/IP settings.
Note
Default: On
Reference
"Configuring the printer for the Network", Setup Guide
IP Address
You can set the IP address.
Limitation
When DHCP is On, its setting cannot be changed. If you want
to change the setting, make the setting for DHCP Off. Consult
the network administrator for information about how to make
the setting for the network.
Note
Default: 011.022.033.044
Reference
"Configuring the printer for the Network", Setup Guide
Administrator Reference
Description
163