Ricoh CL7000 Operating Instructions Manual page 91

B In the [Class of new object] box, click [Print Server], and then click [OK]. When you are using
NetWare 5/5.1, 6, click [Print Server (Non NPDS)].
C In the [Print Server name] box, enter the name of the print server.
Important
Use the same name as that specified using NIB Setup Tool. (Step
D Select the [Define additional properties] check box, and then click [Create].
M M M M
Assign the printer to the created print server as follows:
A Click [Assignments], and then click [Add] in the [Assignments] group.
B In the [Available objects] box, click the queue created in step
C In the [Printers] group, click the printer assigned in step
D Enter the printer number, and then click [OK].
Important
Use the same number as that specified as Remote Printer No. using NIB Setup Tool. (Step
F - E).
E After confirming the settings, click [OK].
N N N N
Start the print server by typing the following from the console of the NetWare Server.
If it is running, restart it after closing.
To exit
CAREE: unload pserver
To start
CAREE: load pserver print_server_name
Operating Instructions Administrator Reference
F - A).
K
, and then click [OK].
B B B B
, and then click [Printer Number].
91